771-ORIENT

fluorescent_product_slider_desktop_771orient_01
Gear tray (reflector): white powder coated steel sheet, which is fixed to the body by flexible gear tray retaining clips. Therefore it is easy to remove and suspend it during installation.
fluorescent_product_slider_desktop_771orient_02
Thanks to special components the 771-Orient works faultlessly and is reliable at higher ambient temperatures up to +50°C
fluorescent_product_slider_desktop_771orient_02

A. Special heat resistant high frequency (electronic) ballast

B. In order to ensure maximum heat chemical and weather resistance even under tough conditions, the gasket between the diffuser and the housing is made of the silicon-based foam with enhanced resistance

fluorescent_product_slider_desktop_771orient_03
Diffuser: Injection moulded polycarbonate (PC). The diffuser has been designed with respect to its optical characteristics, with longitudinal internal prisms and is UV resistant.
fluorescent_product_slider_desktop_771orient_04

Ways of installing

1. Direct (with screws) onto the wall or ceiling.

2. With stainless steel suspension brackets (easy-to-install) onto the ceiling.

3. Suspension on chains with stainless steel suspension brackets mounted with hooks.

fluorescent_product_slider_desktop_771orient_05
Fixing the diffuser to the body: With highly resistant stainless steel clips. Cable entry through grommets or through cable glands.
fluorescent_product_slider_mobile_771orient_01
Gear tray (reflector): white powder coated steel sheet, which is fixed to the body by flexible gear tray retaining clips. Therefore it is easy to remove and suspend it during installation.
fluorescent_product_slider_mobile_771orient_02
Thanks to special components the 771-Orient works faultlessly and is reliable at higher ambient temperatures up to +50°C
fluorescent_product_slider_mobile_771orient_02

A. Special heat resistant high frequency (electronic) ballast

B. In order to ensure maximum heat chemical and weather resistance even under tough conditions, the gasket between the diffuser and the housing is made of the silicon-based foam with enhanced resistance

fluorescent_product_slider_mobile_771orient_03
Diffuser: Injection moulded polycarbonate (PC). The diffuser has been designed with respect to its optical characteristics, with longitudinal internal prisms and is UV resistant.
fluorescent_product_slider_mobile_771orient_04

Ways of installing

1. Direct (with screws) onto the wall or ceiling.

2. With stainless steel suspension brackets (easy-to-install) onto the ceiling.

3. Suspension on chains with stainless steel suspension brackets mounted with hooks.

fluorescent_product_slider_mobile_771orient_05
Fixing the diffuser to the body: With highly resistant stainless steel clips. Cable entry through grommets or through cable glands.

PARAMETERS

Built-in

Options

TECHNICAL DESCRIPTION

771-ORIENT

Industrial dust and waterproof luminaires

YOUR MAIN BENEFITS

A professional luminaire for wide usage, that fulfils the strongest quality requirements.
Especially for applications, where high heat resistance (up to Ta +50 °C) is required.
Available in IP65 or IP66

FIELD OF APPLICATION

Field of application: Due to the construction principles of gasket, closing system and diffuser our fixtures ensure a high grade of protection (IP65, IP66) against dust, contamination, and water permeation. In accordance with their IP rating they can be used widely to illuminate spaces with dusty and humid environment.
Thanks to its enhanced heat resistance, 771-Orient is especially suitable for applications, where error-free functioning at higher ambient temperature is desired.
When using outdoors, the fittings should be protected against direct sunlight and adverse weather conditions.

TECHNICAL DESCRIPTION AND BENEFITS

Housing: It is made of flame retardant glass fibre reinforced polyester (on request suitable for 850°C glow wire test too), in light grey (RAL7035) colour. This material has very good temperature resistance, mechanical stability, furthermore, it is a good electrical insulator, it resists the impacts of several chemicals and the impacts of weather conditions. Its stability of size and shape at changing temperatures is excellent.

The diffuser is available in injection moulded polycarbonate (PC).
Main advantages: High mechanical strength and high heat and shock resistance and excellent transparency.

The diffusers are designed with respect to their optical characteristics and are UV resistant.

In order to ensure maximum heat, chemical and weather resistance even under tough conditions, the gasket between the diffuser and housing is made of silicon-based foam with enhanced resistance.

Non-aging PU (polyurethane) foam is optionally available.

Fixing the diffuser to the body: with highly resistant stainless-steel clips

Gear tray (reflector): White powder coated steel sheet. As an option glossy aluminium reflector is possible.

Electrical components: electronic control gear.

DOWNLOAD

Catalogue pages

Schematic drawing

Mounting instructions

Quality Certificates and Declarations

BIM

Product pictures

Photometric data

Photometric curves

Technical datasheets

MOUNTING INSTALLATION

TECHNICAL DATA

CONTACT FORM

(Please send us your inquiry)

    Name*

    E-mail*

    Company*

    Country*

    Telephone
    (if preferred contact)

    Requested technical Parameters / Remarks

    * Marked fields are mandatory