790-EXTRUDE

led_product_slider_desktop_790xtrude_01

The gear tray is made of white powder coated steel sheet according to Zhaga standards. On request customisation is possible.

led_product_slider_desktop_790xtrude_02

The the pull-out (sliding) tray accelerates the electrical connection easily without disassembling the luminaire.

The glued end caps are locked up hermetically by a bayonet mechanism. After opening it, the connector tray is accessible.
led_product_slider_desktop_790xtrude_03

The diffusing part of the profile is made of UV stabilized opalised material, specially developed for LED applications. This ensures among others a well-balanced light distribution and the elimination of glare.

IP 65 protection is ensured by adhesive that is placed into the seal channel and it secures the end caps to the body.

led_product_slider_desktop_790xtrude_04

In option:

The 790-Xtrude product is available with transparent housing and asymmetric beam optics as 790-Xtrude AB version

led_product_slider_desktop_790xtrude_05

Ways of installing 1

1. With stainless steel mounting brackets (easy-to-install) onto the ceiling

2. With strengthened stainless steel mounting brackets. They are easy to install onto the wall or ceiling.

led_product_slider_desktop_790xtrude_05

Ways of installing 2

3. Suspension on chains or rope with stainless steel suspension brackets mounted with hooks

The mounting brackets can be positioned freely on the housing

led_product_slider_mobile_790xtrude_01

The gear tray is made of white powder coated steel sheet according to Zhaga standards. On request customisation is possible.

led_product_slider_mobile_790xtrude_02

The the pull-out (sliding) tray accelerates the electrical connection easily without disassembling the luminaire.

The glued end caps are locked up hermetically by a bayonet mechanism. After opening it, the connector tray is accessible.
led_product_slider_mobile_790xtrude_03

The diffusing part of the profile is made of UV stabilized opalised material, specially developed for LED applications. This ensures among others a well-balanced light distribution and the elimination of glare.

IP 65 protection is ensured by adhesive that is placed into the seal channel and it secures the end caps to the body.

led_product_slider_mobile_790xtrude_04

In option:

The 790-Xtrude product is available with transparent housing and asymmetric beam optics as 790-Xtrude AB version

led_product_slider_mobile_790xtrude_05

Ways of installing 1

1. With stainless steel mounting brackets (easy-to-install) onto the ceiling

2. With strengthened stainless steel mounting brackets. They are easy to install onto the wall or ceiling.

led_product_slider_mobile_790xtrude_05

Ways of installing 2

3. Suspension on chains or rope with stainless steel suspension brackets mounted with hooks

The mounting brackets can be positioned freely on the housing

PARAMETERS

Built-in

Options

Further options

On request

TECHNICAL DESCRIPTION

790-XTRUDE

Industrial dust and waterproof luminaires with LED modules

Unique appearance with easier, quick installation! Extruded profile with outstanding light transmissivity! Specially developed for LED applications.

YOUR MAIN BENEFITS

Quick installation, length perfectly adapted to the size of the LED modules

FIELD OF APPLICATION

Thanks to the construction principles of gasket, end caps and the extruded profile our LED fixtures ensure a high grade of protection (IP 65) against dust, contamination and water permeation. In accordance with their IP grade they can be widely used to illuminate spaces with dusty, humid environment. When using outdoors, the fittings should be protected against direct sunlight and adverse weather




TECHNICAL DESCRIPTION AND BENEFITS

Housing: Made of Polycarbonate (PC) by co-extrusion. The housing is made in light grey (RAL7035) colour. The diffusing (upper) part is opalised. Thanks to the used raw material the whole fitting shows very high mechanical strength and high heat and shock resistance (IK08).

The co-extruded opal diffuser offers you:

– extremely high light transmissivity (up to 90%) unique on the market

– homogenous, well-balanced light dispersing (no shadows)

– elimination of the dazzling effect (no glare)

– unique appearance and clean impression (no clips, no dots of the single LED´s)

– keeping the usual, well-known features of the diffuser such as chemical and heat resistance, mechanical features, UV stabilization etc.

End caps: Made of extremely resistant polyamide and glued to the housing.

Gear tray (reflector): White powder coated steel sheet according to Zhaga standards or customized.

Electrical components: The adequate power supply is ensured through electronic driver, that is built into the luminaire.




DOWNLOAD

Catalogue pages

Schematic drawing

Mounting instructions

Quality Certificates and Declarations

BIM

Product pictures

Photometric data

Photometric curves

Technical datasheets

MOUNTING INSTALLATION

TECHNICAL DATA

CONTACT FORM

(Please send us your inquiry)

    Name*

    E-mail*

    Company*

    Country*

    Telephone
    (if preferred contact)

    Requested technical Parameters / Remarks

    * Marked fields are mandatory