870-INSPIRE AIR

új búra slide

Our now opalised diffuser made of UV-stabilized material achieves an outstanding light transmissivity up to 90%. This great light permeability otter high efficacy (up to 160 lm/W) emitted from the luminaire.

led_product_slider_desktop_870inspireair_02
In the interest of LED board protection the gear tray is integrated into the diffuser thus enabling a cost efficient and user-friendly quick installation even without disassembling the luminaire.

The stainless steel clips stay in their position during installation and can be released by bare hands.

Compatible with all optional accessories and smart solutions!
led_product_slider_desktop_870inspireair_03

Installation friendly construction:

The strap ensures suspension of the gear tray and the diffuser during installation.

led_product_slider_desktop_870inspireair_03

In order to optimise the thermal management of the luminaire and to maximize the lifetime of the led modules, the driver is placed into the body without direct contact to the gear tray.

led_product_slider_desktop_870inspireair_04

The gear tray, made of white powder coated steel sheet according to Zhaga standards, is integrated into the diffuser.

With 870-Inspire Air- depending on customer requirements - we can reach different levels of luminous flux from 2700 up to 14500 lumen, with maximum efficacy of 160 lm/W. Details see technical data

led_product_slider_desktop_870inspireair_05
The injected silicon-based gasket with enhanced resistance ensures maximum chemical and weather resistance even under tough conditions. This endless foam sealing ensures the high IP protection up to IP66.
led_product_slider_desktop_870inspireair_06
Options for cable entry:

A. IP66 Grommet

B. Cable Gland

C. The Rapid Connector enables the electrical connection without disassembling the luminaire
led_product_slider_desktop_870inspireair_07

Ways of installing (options):

With strenghtened (0,6 mm) stainless steel mounting brackets.

1.a They are easy-to-install onto the wall or the ceiling in horizontal position

1.b In case of vertical positioning, special screws keep the mounting brackets tight avoiding the luminaire from sliding.

led_product_slider_desktop_870inspireair_07

Easy installation: Adjustable distance of the mounting brackets (they can be positioned laterally on the housing.

led_product_slider_mobile_870inspireair_01

Our now opalised diffuser made of UV-stabilized material achieves an outstanding light transmissivity up to 90%. This great light permeability otter high efficacy (up to 160 lm/W) emitted from the luminaire.
Feel free to choose from our two types of slightly different diffuser designs.

led_product_slider_mobile_870inspireair_01

A. The original diffuser design

B. The modified oval variant

led_product_slider_mobile_870inspireair_02
In the interest of LED board protection the gear tray is integrated into the diffuser thus enabling a cost efficient and user-friendly quick installation even without disassembling the luminaire.

led_product_slider_mobile_870inspireair_02
The stainless steel clips stay in their position during installation and can be released by bare hands.

Compatible with all optional accessories and smart solutions!
led_product_slider_mobile_870inspireair_03

Installation friendly construction:

The strap ensures suspension of the gear tray and the diffuser during installation.

led_product_slider_mobile_870inspireair_03

In order to optimise the thermal management of the luminaire and to maximize the lifetime of the led modules, the driver is placed into the body without direct contact to the gear tray.

led_product_slider_mobile_870inspireair_04

The gear tray, made of white powder coated steel sheet according to Zhaga standards, is integrated into the diffuser.

led_product_slider_mobile_870inspireair_04

With 870-Inspire Air- depending on customer requirements - we can reach different levels of luminous flux from 2700 up to 14500 lumen, with maximum efficacy of 160 lm/W. Details see technical data

led_product_slider_mobile_870inspireair_05
The injected silicon-based gasket with enhanced resistance ensures maximum chemical and weather resistance even under tough conditions. This endless foam sealing ensures the high IP protection up to IP66.
led_product_slider_mobile_870inspireair_06
Options for cable entry:

A. Comes with venting cable gland in order to prevent the build-up of moisture inside the luminaire thus avoiding its damage.

led_product_slider_mobile_870inspireair_06
Options for cable entry:

B. The Rapid Connector enables the electrical connection without disassemblingthe luminaire

C. The venting plug is a pressure equializer instead of the venting cable gland in case of application of rapid connector.

led_product_slider_mobile_870inspireair_07

Ways of installing (options):

With strenghtened (0,6 mm) stainless steel mounting brackets.

1.a They are easy-to-install onto the wall or the ceiling in horizontal position

led_product_slider_mobile_870inspireair_07

Ways of installing (options):

1.b In case of vertical positioning, special screws keep the mounting brackets tight avoiding the luminaire from sliding.

led_product_slider_mobile_870inspireair_07

Easy installation: Adjustable distance of the mounting brackets (they can be positioned laterally on the housing.

PARAMETERS

Built-in

Options

Further options

On request

TECHNICAL DESCRIPTION

870-INSPIRE-AIR

High-end dust and waterproof luminaires for outdoor with LED modules.

A professional solution especially for outdoor applications. 870-Inspire Air withstands the impact of adverse weather conditions.

YOUR MAIN BENEFITS

Enhanced weather resistance (sunlight, rain, wind). Suitable for outdoor applications with errorfree functioning. Gear tray integrated into the diffuser. Quick installation even without disassembling the luminaire.

FIELD OF APPLICATION

Due to the construction principles of gasket, closing system and diffuser our fixtures ensure a high grade of

protection (IP66) against dust, contamination, and water permeation. In accordance with their IP grade they

can be used widely to illuminate areas with dusty and humid environment.

Thanks to its enhanced weather resistance, 870-Inspire Air is especially suitable for applications, where

errorfree functioning in outdoor conditions is desired.

TECHNICAL DESCRIPTION AND BENEFITS

Housing: Available flame retardant GRP – glass fibre reinforced polyester in light grey (RAL7035) colour. Glass fibre

reinforced polyester has very good temperature resistance, mechanical stability, furthermore it is a good electrical

insulator, it resists the impacts of several chemicals and the impacts of weather conditions. Its stability of size and

shape at changing temperatures is excellent.

Diffuser: is available in injection moulded opalised Acrylic PMMA with unique non-aging properties, extremely

high light permeability and well-balanced light dispersing. The diffusers are designed with respect to their optical

characteristics and are UV resistant. Main advantages: weather resistance and extremely high light efficiency.

Further benefits:

– Extremely high light transmissivity (up to 90%)

– Homogenous, well-balanced light dispersing (no shadows)

– Keeping the usual, well-known features of the diffuser such as chemical and heat resistance, mechanical features, UV stabilization etc.

– Universal width (no single and twin) simplifies the light calculation

Gasket: silicon-based endless foam with enhanced resistance.

Fixing the diffuser to the body: With stainless steel clips.

Gear tray (reflector): The gear tray is integrated into the diffuser thus enabling a cost efficient and user-friendly installation even without disassembling the luminaire. White powder coated steel sheet

according to Zhaga standards or customized.

Electrical components: The adequate power supply is ensured through electronic driver.

DOWNLOAD

Catalogue pages

Schematic drawing

Mounting instructions

Quality Certificates and Declarations

BIM

Product pictures

Photometric data

Photometric curves

Technical datasheets

MOUNTING INSTALLATION

TECHNICAL DATA

CONTACT FORM

(Please send us your inquiry)

    Name*

    E-mail*

    Company*

    Country*

    Telephone
    (if preferred contact)

    Requested technical Parameters / Remarks

    * Marked fields are mandatory