870-INSPIRE +/-

új búra slide

Our now opalised diffuser made of UV-stabilized material achieves an outstanding light transmissivity up to 90%. This great light permeability otter high efficacy (up to 141 lm/W) emitted from the luminaire.

led_product_slider_desktop_870inspire+-_02
In the interest of LED board protection the gear tray is integrated into the diffuser thus enabling a cost efficient and user-friendly quick installation even without disassembling the luminaire.

The stainless steel clips stay in their position during installation and can be released by bare hands
led_product_slider_desktop_870inspire+-_03

Compatible with all accessories and smart solutions

led_product_slider_desktop_870inspire+-_04

Installation friendly construction:

The strap ensures suspension of the gear tray and the diffuser during installation.

led_product_slider_desktop_870inspire+-_04

In order to optimise the thermal management of the luminaire and to maximize the lifetime of the led modules, the driver is placed into the body without direct contact to the gear tray.

Extra-long (double) lifetime of the driver, high luminous flux even at extreme ambient temperatures are your benefits.

led_product_slider_desktop_870inspire+-_05

The gear tray, made of white powder coated steel sheet according to Zhaga standards, is integrated into the diffuser.

With 870-Inspire GRP - depending on customer requirements - we can reach different levels of luminous flux up to 14000 lumen, with maximum efficacy of 160lm/W. Details see technical data

led_product_slider_desktop_870inspire+-_06
The injected silicon-based gasket with enhanced resistance ensures maximum chemical and weather resistance even under tough conditions. This endless foam sealing ensures the high IP protection up to IP66.
led_product_slider_desktop_870inspire+-_07

Options for cable entry 1:

A. In case of standard version a venting cable gland is applied

B. The Rapid Connector enables the electrical connection without disassembling the luminaire

led_product_slider_desktop_870inspire+-_07

Options for cable entry 2:

C. In case of throughwiring version, with the usage of rapid connectors on the two ends, a venting plug is applied

Thanks to the venting cable gland or the venting plug the condensation of the humidity inside the luminaire can be avoided

led_product_slider_desktop_870inspire+-_08

Ways of installing 1 (options):

With strenghtened (0,6 mm) stainless steel mounting brackets.

1.a They are easy-to-install onto the wall or the ceiling in horizontal position

1.b In case of vertical positioning, special screws keep the mounting brackets tight avoiding the luminaire from sliding.

led_product_slider_desktop_870inspire+-_08

Ways of installing 2 (options):

2. suspension on chains or wire ropes with stainless steel suspension brackets mounted with hooks

Easy installation: (0,6 mm) Adjustable distance of the mounting brackets (they can be positioned laterally on the housing.

led_product_slider_mobile_870inspire+-_01

Our now opalised diffuser made of UV-stabilized material achieves an outstanding light transmissivity up to 90%. This great light permeability otter high efficacy (up to 141 lm/W) emitted from the luminaire.
Feel free to choose from our two types of slightly different diffuser designs.

led_product_slider_mobile_870inspire+-_01

A. The original diffuser design

B. The modified oval variant

led_product_slider_mobile_870inspire+-_02
In the interest of LED board protection the gear tray is integrated into the diffuser thus enabling a cost efficient and user-friendly quick installation even without disassembling the luminaire.

The stainless steel clips stay in their position during installation and can be released by bare hands
led_product_slider_mobile_870inspire+-_03

Compatible with all accessories and smart solutions

led_product_slider_mobile_870inspire+-_04

Installation friendly construction:

The strap ensures suspension of the gear tray and the diffuser during installation.

led_product_slider_mobile_870inspire+-_04

In order to optimise the thermal management of the luminaire and to maximize the lifetime of the led modules, the driver is placed into the body without direct contact to the gear tray.

Extra-long (double) lifetime of the driver, high luminous flux even at extreme ambient temperatures are your benefits.

led_product_slider_mobile_870inspire+-_05

The gear tray, made of white powder coated steel sheet according to Zhaga standards, is integrated into the diffuser.

led_product_slider_mobile_870inspire+-_05

With 870-Inspire +/- - depending on customer requirements - we can reach different levels of luminous flux up to 9800 lumen, with maximum efficacy of 141 lm/W. Details see technical data

led_product_slider_mobile_870inspire+-_06
The injected silicon-based gasket with enhanced resistance ensures maximum chemical and weather resistance even under tough conditions. This endless foam sealing ensures the high IP protection up to IP66.
led_product_slider_mobile_870inspire+-_07

Options for cable entry 1:

A. In case of standard version a venting cable gland is applied

B. The Rapid Connector enables the electrical connection without disassembling the luminaire

led_product_slider_mobile_870inspire+-_07

Options for cable entry 2:

C. In case of throughwiring version, with the usage of rapid connectors on the two ends, a venting plug is applied

Thanks to the venting cable gland or the venting plug the condensation of the humidity inside the luminaire can be avoided

led_product_slider_mobile_870inspire+-_08

Ways of installing 1 (options):

With strenghtened (0,6 mm) stainless steel mounting brackets.

led_product_slider_mobile_870inspire+-_08

Ways of installing 2 (options):

1.a They are easy-to-install onto the wall or the ceiling in horizontal position

1.b In case of vertical positioning, special screws keep the mounting brackets tight avoiding the luminaire from sliding.

led_product_slider_mobile_870inspire+-_08

Ways of installing 3 (options):

2. suspension on chains or wire ropes with stainless steel suspension brackets mounted with hooks

Easy installation: (0,6 mm) Adjustable distance of the mounting brackets (they can be positioned laterally on the housing.

PARAMETERS

Built-in

Options

Further options

On request

TECHNICAL DESCRIPTION

870-INSPIRE +/-

High-end dust and waterproof luminaires with LED modules.

Professional quality suitable for wide application 2-in-1: Error-free functioning at extreme ambient temperature

YOUR MAIN BENEFITS

A professional luminaire adapted for extremely high and extremely low ambient temperatures. (Ta: -30 to +50 °C) for wide usage, that fulfils the strongest quality requirements.

FIELD OF APPLICATION

Thanks to the construction principles of gasket, closing system and diffuser our LED fixtures ensure a high grade of protection (IP66) against dust, contamination, and water permeation. In accordance with their IP rating they can be widely used to illuminate spaces with dusty and humid environments. Thanks to its enhanced temperature resistance, 870-Inspire +/- is especially suitable for applications, where error-free functioning at high and low ambient temperature is desired (industrial plants, cold stores, in countries with subtropic climate…etc.)

When using outdoors, the fittings should be protected against direct sunlight and adverse weather conditions. Under 0°C the application of venting plug or venting cable gland is necessary.

 

TECHNICAL DESCRIPTION AND BENEFITS

Housing: Available with PC or GRP body, in light grey (RAL7035) colour.

In case of PC: It is made of flame retardant injection moulded polycarbonate (PC) – suitable for 850°C glow wire test too-, the Polycarbonate has very high mechanical strength and allows us to reach an excellent shock resistance.

In case of GRP: It is made of flame retardant GRP – glass fibre reinforced polyester – on request suitable for 850°C glow wire test too-, glass fibre reinforced polyester has very good temperature resistance, mechanical stability, furthermore, it is a good electrical insulator, it resists the impacts of several chemicals and the impacts of weather conditions. Its stability of size and shape at changing temperatures is excellent.

Diffuser: Available in PC – injection moulded opalised polycarbonate (high mechanical strength and high heat and shock resistance). Thanks to its enhanced impact resistance, 870-Inspire +/- is especially suitable for applications, where a high IK impact rating at extreme ambient temperature is required.

Further benefits:

Extremely high light transmissivity (up to 90%)

Homogenous, well-balanced light dispersing (no shadows)

Keeping the usual, well-known features of the diffuser such as chemical and heat resistance, mechanical features, UV stabilization etc.

Universal width (no single and twin) simplifies the light calculation.

Gasket: silicon-based endless foam with enhanced resistance.

Fixing the diffuser to the body: With stainless steel clips.

Gear tray (reflector): The gear tray is integrated into the diffuser thus enabling a cost efficient and user-friendly installation even without disassembling the luminaire. White powder coated steel sheet, the LED modul mounting positions according to Zhaga standards or customized.

Electrical components: The adequate power supply is ensured through electronic driver.

DOWNLOAD

Catalogue pages

Schematic drawing

Mounting instructions

Quality Certificates and Declarations

BIM

Product pictures

Photometric data

Photometric curves

Technical datasheets

MOUNTING INSTALLATION

TECHNICAL DATA

CONTACT FORM

(Please send us your inquiry)

    Name*

    E-mail*

    Company*

    Country*

    Telephone
    (if preferred contact)

    Requested technical Parameters / Remarks

    * Marked fields are mandatory